PRINTING ENVELOPES IN LIBREOFFICE MANUAL

In the dialog window that opens Write a name, e.g.

Add it your Templates folder, File | Templates | Save as Template.

For types of envelopes to avoid, refer to the Users Guide page 1-16. Stacking envelopes may cause the envelope to jam or curl. Remove each envelope immediately after printing. All sides of the envelope should be properly folded without wrinkles or creases.

PRINTING ENVELOPES IN LIBREOFFICE MANUAL

The printer dialog will open, select the envelope size in the paper size settings, so # 10, COM-10 or similar name (DL for the DL template) and probably select Landscape and also the printer Tray if needed (you might need to check with your printer manual for these settings). Envelope joints that are sealed by the manufacturer should be secure. In the menu click File | Printer Settings, in the window that opens, select your printer from the drop down box and click Properties.

With the template above downloaded and open I have a template I use, so here it is in DL and in #10: DL_Envelope.ott & No10_Envelope.ott OK outвЂќ as you will need to set up your printer for the template. Click Properties and set paper size to # 10 (DL if using DL), orientation to Landscape. I need to re-iterate the bit about вЂњIn menu click File | Printer SettingsвЂ¦ In window choose the printer. If you are using A4 paper then DL envelope is normal, for Letter then No 10 envelope. You need a margin of 12 mm (half inch) at the left and 24 mm (one inch) at the right. Having said that they are centred in the paper tray so should not print with an offset. Hi I have to say the manual for your printer is a bit unclear on which orientation to load the envelopes.

Printing envelopes in libreoffice